gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15718 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15716

Sierra 1500 4WD V8-4.8L (2007)

Page 5
background image

15. For those vehicles equipped with RPO code JH6, use the J 45270 (1) to remove the wheel studs (2).

16. For those vehicles equipped with RPO code JH7, use a hydraulic press to remove the wheel studs.
17. Remove the rear brake disc from the rear axle hub.

Installation Procedure

1. For vehicles equipped RPO code JH7, position the brake rotor on the rear axle hub.

Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15718 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15716