Sierra 1500 4WD V8-4.8L (2007)
Seals and Gaskets: Service and Repair
NVG 261-NP2 - Transfer Case
Front Output Shaft Seal Replacement
Front Output Shaft Seal Replacement
Tools Required
*
J 8092 Drive Handle
*
J 43484 Output Shaft Seal Installer
Removal Procedure
1. Remove the transfer case shield, if equipped.
2. Remove the front propeller shaft.
3. Insert a flat-tipped screwdriver into the inner race.
4. Pry the inner race back.
5. Insert a small pry bar into the inner race.
6. Remove the inner part of the seal.