Sierra 1500 4WD V8-4.8L VIN V (2004)
5. Perform the following procedure to remove the cable from the backing plate:
1. Compress the spring by pushing towards the lever.
2. Depress the locking tabs.
3. Pull the cable housing out of the backing plate.
4. Remove the cable through the slot in the backing plate.
6. Remove the rotor.
7. Remove the axle shaft.
8. Remove the park brake shoe.
9. Remove the backing plate bolts.
10. Remove the backing plate from axle housing flange.
Installation Procedure
1. Install the backing plate to the axle housing flange.
