Sierra 1500 4WD V8-4.8L VIN V (2004)
Power Steering Line/Hose: Service and Repair
(Rack and Pinion)
Power Steering Gear Inlet Pipe/Hose Replacement (Rack and Pinion)
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
1. Remove the power steering inlet hose (2) from the power steering pump (1).
2. Remove the power steering inlet hose (2) from the power steering gear (3).
Installation Procedure
1. Connect the power steering inlet hose (2) to the power steering gear (3).
2. Notice:
Refer to Fastener Notice in Service Precautions.
Connect the power steering inlet hose (2) to the power steering pump (1).
^
Tighten the hose connections to 28 Nm (20 ft. lbs.).
3. Bleed the power steering system. Refer to Bleeding the Power Steering System.
4. Inspect all the hose connections for leaks.
(With Hydroboost)
Power Steering Gear Inlet Pipe/Hose Replacement (With Hydroboost)
Removal Procedure
