Sierra 1500 4WD V8-4.8L VIN V (2004)
Steering Damper: Service and Repair
Steering Damper Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
-
J 29193 Steering Linkage Installer-12 mm
Removal Procedure
1. Raise the vehicle. Support the vehicle with safety stands. Refer to Vehicle Lifting.
2. Remove the engine protection shield, if equipped.
3. Important:
Do not reuse the nut.
Remove the steering damper (2) ball stud nut (1).
4. Remove the steering damper ball stud from the relay rod using the J 24319-B.
5. Important:
Do not reuse the nut.
Remove the steering damper mounting bolt (5) and the nut (6).
6. Remove the steering damper (4) from the vehicle.
7. Inspect the following parts:
