Sierra 1500 4WD V8-4.8L VIN V (2004)
6. Install the wheel hub and bearing (5) and splash shield (6) to the vehicle, 15 series.
7. Install the wheel hub and bearing mounting bolts, the 15 series.
8. Install the wheel hub and bearing mounting bolts, 25/35 series.
^
Tighten the wheel hub to knuckle bolts to 180 Nm (133 ft. lbs.).
9. Install the nut (2) and washer (3) retaining the wheel drive shaft assembly to the wheel hub and bearing.
^
Tighten the nut to 240 Nm (177 ft. lbs.).
10. Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle.
^
Tighten the brake hose clip bolt to 12 Nm (106 inch lbs.).
11. Install the rotor. Refer to Brake Rotor Replacement - Front in Disc Brakes.
12. Install the tire and wheel.
13. Lower the vehicle.
