Sierra 1500 4WD V8-4.8L VIN V (2004)
Speed Sensor: Service and Repair
Transfer Case - NVG 263-NP1
Transfer Case Speed Sensor Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the speed sensor electrical connector.
3. Remove the speed sensor.
Installation Procedure
1. Notice:
Refer to Fastener Notice in Service Precautions.
Install the speed sensor.
^
Tighten the sensor to 15 Nm (11 ft. lbs.).
