Sierra 1500 4WD V8-4.8L VIN V (2004)
Rear Door Window Regulator: Service and Repair
Window Regulator Replacement - Rear Door
Removal Procedure
1. Raise and support the window glass.
2. Remove the trim panel.
3. Remove the water deflector.
4. Remove the 2 bolts that hold the window to the regulator.
5. Remove the bolts from the window regulator.
6. Remove the window regulator assembly from the door by folding both sides together.
Installation Procedure
1. Install the regulator to the door.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts to the window regulator.
Tighten the bolts to 9 N.m (80 lb in).
3. Align the window glass to the regulator.
4. Install the bolts that hold the window to the regulator.
Tighten the bolts to 9 N.m (80 lb in).
5. Install the water deflector.
6. Install the trim panel.
7. Lower the window. Inspect the operation.
