Sierra 1500 4WD V8-5.3L VIN B (2005)
the return spring from the lever. If the return spring becomes separated from the lever, replace the rear brake shoes. The lever is part of the brake
shoe assembly.
Remove the park brake cable from the lever.
Installation Procedure
1. Apply a small amount of high temperature silicone grease or equivalent to the contact areas between the rear brake shoes and the backing plate.
2. Important: When installing the park brake cable into the lever, a snap or clip should be felt or heard. This will indicate that the park brake cable
is properly in seated in the lever.
Install the park brake cable in the lever.
