Sierra 1500 4WD V8-5.3L VIN B (2005)
13. If equipped with a 8.1L engine perform the following:
14. Install the oil cooler hoses to the clip.
Important:
^
Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap exists, or the
plastic cap is damaged, obtain a new cap. Install the cap onto the cooler line prior cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
15. If equipped with a 5.3L or 6.0L engine, perform the following:
0. Install the oil cooler hoses to the hose clip on the fan shroud.
1. Snap the oil cooler hose clip shut.
16. Connect the engine oil cooler quick connect fittings.
