Sierra 1500 4WD V8-5.3L VIN B (2005)
4. Remove the power steering gear outlet hose from the vehicle.
Installation Procedure
1. Route the hose in the same position the hose occupied prior to removal.
Notice: Refer to Installing Hoses Without Twists or Bends Notice in Service Precautions.
2. Install the power steering gear outlet hose (3) to the power steering pump (1). Position the clamp at the end of the hose.
3. Install the power steering gear outlet hose to the power steering gear.
^
Tighten the outlet hose fitting to 28 Nm (20 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Remove the drain pan from under the vehicle.
5. Bleed the power steering system.
Power Steering Gear Outlet Pipe/Hose Replacement (Rack and Pinion)
Power Steering Gear Outlet Pipe/Hose Replacement (Rack and Pinion)
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
1. Remove the power steering outlet hose (4) from the power steering gear (3).
2. Remove the power steering outlet hose (4) from the power steering cooler (5).
Installation Procedure
