Sierra 1500 4WD V8-5.3L VIN B (2005)
Power Mirror Switch: Service and Repair
ACCESSORY SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the IP trim bezel.
2. Grasp the accessory switch assembly and pull outwards to remove the button assembly.
3. Disconnect the electrical connectors for the switches in the assembly.
4. Remove the switches and the button assembly.
INSTALLATION PROCEDURE
1. Connect the electrical connectors to the switches in the assembly
2. Install the accessory switch assembly into the IP till it snaps into place.
3. Install the IP trim bezel.
