Sierra 1500 4WD V8-5.3L VIN B (2005)
8. Turn the wheel hub over and install the inner bearing cup.
9. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).
10. Install the inner bearing.
11. Install the new oil seal using the J 44420 (2) and the J 8092 (1).
Important: Each time you replace the wheel hub bearings, install a new oil seal in order to prevent the wheel hub from leaking.
12. Install the rotor, if necessary, See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
