Sierra 1500 4WD V8-5.3L VIN B HO (2006)
service kit will cause the passenger presence system to operate improperly.
12. Remove the pad from the seat cushion frame.
13. Remove the seat cushion heater element, if equipped.
INSTALLATION PROCEDURE
1. Install the seat cushion heater element, if equipped.
2. Install the Inflatable Restraint Passenger Presence System.
3. Install the seat cushion pad to the seat cushion frame.
4. Using a side motion, carefully pull the seat cushion cover onto the frame pad.
5. Attach the seat trim cover to the seat cushion frame.
6. Install the lumbar actuator (5).
7. Install the seat switch bezel.
8. Place the cushion on the rear plastic holders (1) on the underside of the seat cushion, and push rearward.
