gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Cooling Fan and Shroud Replacement|Page 4861 > < Cooling Fan and Shroud Replacement|Page 4859
Page 4
background image

9. Install the engine harness clip to the PCM cover.

10. Install the A/C line retainer to the fan shroud.

11. Install the air cleaner outlet duct.
12. Tighten the air cleaner outlet duct clamp at the throttle body.

^

Tighten the clamp to 4 Nm (35 inch lbs.).

13. Tighten the air cleaner outlet duct clamp at the mass airflow sensor.

^

Tighten the clamp to 4 Nm (35 inch lbs.).

Manual Transmission

Fan Shroud Replacement - Upper (Manual Transmission - Gasoline) 
Removal Procedure

1. Loosen the air cleaner outlet duct clamps from the throttle body.
2. Loosen the air cleaner outlet duct clamps from the mass airflow sensor.
3. Remove the air cleaner outlet duct.
4. If equipped remove the throttle body heater hose retainer from the fan shroud.
5. If equipped remove the inlet radiator hose retainer from the fan shroud.

Cooling Fan and Shroud Replacement|Page 4861 > < Cooling Fan and Shroud Replacement|Page 4859