Sierra 1500 4WD V8-5.3L VIN B HO (2006)
Notice: Refer to Fastener Notice in Service Precaution.
7. Tighten the J 41476 mounting bolts until snug. Do not overtighten.
1. Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).
2. Tighten the engine rear cover bolts to 25 Nm (18 ft. lbs.).
8. Remove the J 41476 .
9. Install a NEW crankshaft rear oil seal.
10. Install the engine flywheel.