Sierra 1500 4WD V8-5.3L VIN B HO (2006)
Engine Mount: Service and Repair
Engine Mount Replacement - Right
Engine Mount Replacement - Right
Removal Procedure
1. Remove the exhaust manifold.
2. Remove the engine mount-to-engine mount bracket bolts.
3. Raise and suitably support the vehicle.
4. Remove the tire and wheel.
5. Remove the inner wheelhouse panel.
6. Remove the engine protection shield, if equipped.
Important: DO NOT raise and/or support the engine by the crankshaft balancer, or oil pan.
7. Raise and suitably support the engine using adjustable (screw type) jack stands.
8. Remove the engine mount to engine bolts.
9. Remove the right engine mount.
Installation Procedure
1. Position the right engine mount to the engine.