Sierra 1500 4WD V8-5.3L VIN B HO (2006)
Rear Toe Adjustment
1. Loosen the jam nut on the tie rod (1).
2. Rotate the inner tie rod to the required toe specification setting. Refer to Wheel Alignment Specifications.
3. Tighten the jam nut on the tie rod.
^
Tighten the tie rod jam to 65 Nm (48 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
