Sierra 1500 4WD V8-5.3L VIN B HO (2006)
7. Remove the plugs from the transmission oil cooler line fittings.
8. Connect the transmission oil cooler lines.
9. Install the exhaust pipe hanger bracket and bolts.
^
Tighten the bolts to 17 Nm (12 ft. lbs.).
10. Instal the insulator and nuts to the bracket.
^
Tighten the nuts to 17 Nm (12 ft. lbs.).
11. Tighten the right exhaust pipe nuts.
^
Tighten the nuts to 50 Nm (37 ft. lbs.).
12. Tighten the left exhaust pipe nuts.
^
Tighten the nuts to 50 Nm (37 ft. lbs.).
