Sierra 1500 4WD V8-5.3L VIN B HO (2006)
3. For a new TCC PCS (7), install O-rings and lubricate with clean transmission fluid. Push the new TCC PCS (7) into the control valve assembly
with the wiring harness connector in the correct position.
4. Install the TCC PCS retainer and bolt.
^
Tighten the bolt to 12 Nm (108 inch lbs.).
5. For a new SS 1 (5), install O-rings (3 and 4) and lubricate with clean transmission fluid. Push the new SS 1 (5) into the control valve assembly
with the wiring harness connector in the correct position. Install the solenoid retainer (2).
6. Install the oil pan and transmission internal oil filter.
