gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12188 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12186

Sierra 1500 4WD V8-5.3L VIN B HO (2006)

Page 4
background image

4. Drive the bearing cup into the wheel hub using the J 44419 (2) and the J 8092 (1).

5. Install the retaining ring into the groove. Make sure the retaining ring is fully and evenly seated in the groove.

6. Install the inner bearing cup.

7. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).

Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12188 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12186