gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12189 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12187

Sierra 1500 4WD V8-5.3L VIN B HO (2006)

Page 5
background image

8. Install the inner bearing.

9. Install the new oil seal using the J 44420 (2) and the J 8092 (1).

Important: Each time you replace the wheel hub bearings, install a new oil seal in order to prevent the wheel hub from leaking.

10. Install the rotor, if necessary. 
11. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.

12. Install the wheel hub to the axle housing.

13. Install the adjusting nut to the hub using the J 2222-C.
14. Adjust the wheel bearings. Refer to Wheel Bearing Adjustment.
15. Install the axle shaft. 
16. Install the brake caliper. 

Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12189 > < Rear Axle Shaft Seal and/or Bearing Replacement (W/Rear Disc)|Page 12187