Sierra 1500 4WD V8-5.3L VIN B HO (2006)
1. Place the new small seal clamp (2) onto the small end of the joint seal (1). Compress the joint seal (1) and small seal clamp (2) onto the halfshaft
bar.
2. Position the small end of the joint seal (1) into the joint seal groove (3) on the halfshaft bar.
3. Secure the small seal clamp (1) with J 35910 , or equivalent, a breaker bar, and a torque wrench.
^
Tighten the small seal clamp (1) to 136 Nm (100 ft. lbs.).
Notice:
Refer to Fastener Notice in Service Precautions.
4. Inspect the gap dimension on the clamp ear. Continue tightening until the gap dimension is reached.
