Sierra 1500 4WD V8-5.3L VIN B HO (2006)
9. Install the new oil seal using the J 44420 (2) and the J 8092 (1).
Important: Each time you replace the wheel hub bearings, install a new oil seal in order to prevent the wheel hub from leaking.
10. Install the rotor, if necessary.
11. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
12. Install the wheel hub to the axle housing.
13. Install the adjusting nut to the hub using the J 2222-C.
14. Adjust the wheel bearings. Refer to Wheel Bearing Adjustment.
15. Install the axle shaft.
16. Install the brake caliper.
17. Install the tire and wheel assembly.
18. Inspect and add axle lubricant to the axle housing, if necessary.
19. Lower the vehicle.
