Sierra 1500 4WD V8-5.3L VIN T (2004)
CD Changer: Description and Operation
REMOTE CD CHANGER (CDX)
The remote CD changer allows for multiple compact disks to be played continuously without having to manually change compact discs. Normal size
discs may be played using the slots supplied in the magazine. The magazine must first be loaded with discs before it can played. To load CDs, insert the
CDs from bottom to top, placing the discs in the magazine label side up. If a disc is loaded label side down, the disc will not play and an error will occur.
Care should be used to align and insert the disc into one disc tray only. Repeat this procedure for loading all of the discs in the magazine. Once the discs
are loaded into the magazine, push the magazine into the changer in the direction of the arrow marked on the magazine. When the CD magazine is
loaded, the changer will begin checking for discs in the magazine. This will continue for up to one and a half minutes, depending on the number of
discs loaded. To eject the magazine from the player, push the CD changer door. The door will open. Then press the eject button. NOTICE: If the CD
magazine fails to eject after the EJECT button has been pressed, do not attempt to pry the magazine from the CD changer. Whenever a CD magazine
with discs is loaded in the changer, the CD changer symbol will appear on the radio display. If the CD changer is checking the magazine for CDs, the CD
symbol will flash on the display until the changer is ready to play.
