Sierra 1500 4WD V8-5.3L VIN T (2004)
9. Connect the brake lines to the BPMV.
Tighten
Tighten the fittings to 25 N.m (18 lb ft).
10. Connect the chassis electrical harness connectors to the EBCM.
11. Install the EVAP canister.
12. Install the transfer case harness to the clip bracket.
13. Install the clip to the bracket on the frame.
14. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
15. Install the fuel hose/pipe clip to the bracket on the automatic transmission.
16. Install the HO2S sensor connector to the bracket.
17. Install the fuel pipe bracket to the bellhousing stud.
18. Install the fuel pipe bracket nut (2).
