Sierra 1500 4WD V8-5.3L VIN T (2004)
15. If vehicle is a extended cab, remove the fuel and EVAP bundle nuts.
16. Remove the fuel and EVAP bundle.
INSTALLATION PROCEDURE
1. Install the fuel and EVAP bundle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. If vehicle is a extended cab, install the fuel and EVAP bundle nuts.
Tighten
Tighten the nuts to 12 N.m (106 lb in).
3. If vehicle is a regular cab, install the fuel and EVAP bundle nuts.
Tighten
Tighten the nuts to 12 N.m (106 lb in).