Sierra 1500 4WD V8-5.3L VIN T (2004)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the clutch pedal to brake module bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the clutch pedal to clutch pedal bracket bolt.
^
Tighten the bolt to 36 Nm (27 ft. lbs.).
4. Push the clutch master cylinder in until the pushrod socket is touching the clutch pedal.
5. Push in and rotate the clutch master cylinder 45 degrees counterclockwise to the locked position.
6. If equipped with a ZF S6-650 transmission, connect the clutch master cylinder to clutch actuator cylinder quick connect fitting.
7. If equipped with a NV 3500 or NV 4500 transmission, connect the clutch master cylinder to clutch actuator cylinder quick connect fitting.
