Sierra 1500 4WD V8-5.3L VIN T (2004)
Case: Service and Repair
Transfer Case - NVG 246-NP8
Transfer Case Shield Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. If the vehicle is a 1500 series, remove the transfer case shield bolts, if equipped.
3. Remove the transfer case shield, if equipped.
4. If the vehicle is a 2500 series, remove the transfer case shield screws, if equipped.
5. Remove the transfer case shield, if equipped.
Installation Procedure
1. If the vehicle is a 2500 series, position the transfer case shield, if equipped.
2. Install the transfer case shield screws, if equipped.