Sierra 1500 4WD V8-5.3L VIN T (2004)
1. Install the J 43484 (2) to the J 8092 (1).
2. Install a NEW seal onto J 43484.
3. Using J 43484 (2), and J 8092 (1), install the seal.
4. Install the front propeller shaft.
5. Check the fluid level. Add fluid, if necessary.
6. Install the transfer case shield, if equipped.
Transfer Case Output Shaft Seal Replacement - Rear
Transfer Case Output Shaft Seal Replacement - Rear
^
Tools Required
-
J 37668-A Output Shaft Seal Installer
-
J 45380 Transfer Case Rear Bushing Remover and Installer
Removal Procedure
1. Remove the transfer case shield, if equipped.
2. Remove the rear propeller shaft.
3. Pry out the rear output shaft seal, using a flat-tipped screwdriver.
