Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
1. Install the new brake cable (2) into the rear brake cable mounting bracket (3) by pushing the cable into place until the locking tabs (1) snap into
place.
2. Install the park brake cable to the lever.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the rear park brake cable bracket bolt.
Tighten the bolt to 61 Nm (45 ft. lbs.).
4. Install the park brake cable and the bolt to the lower shock absorber mount.
Tighten the bolt to 22 Nm (16 ft. lbs.).
5. Install the park brake cable taking care to correctly route the cable though the guides and the body mounts.
