Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the rear park brake cable bracket bolt.
Tighten the bolt to 61 Nm (45 ft. lbs.).
4. Install the park brake cable to the differential clip.
5. Install the park brake cable bolt to the rear axle clip.
Tighten the bolt to 22 Nm (16 ft. lbs.).
6. Install the park brake cable taking care to correctly route the cable though the guides and the body mounts.
7. Install the park brake cable into the mounting bracket until the locking tabs snap into place.
8. Pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Lower the vehicle.
