Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
2. Connect the intermediate cable to the front cable.
3. For 25/35 series vehicles, connect the intermediate cable to the rear park brake cable.
4. For 15 series vehicles, install the rear park brake cables to the equalizer.
5. For 15 series vehicles, install the equalizer and the nut to the threaded end of the intermediate cable.
Tighten the nut to 3.5 Nm (31 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
6. For 25/35 series vehicles, enable the park brake cable automatic adjuster.
7. Remove the safety stands and lower the vehicle.
8. Adjust the park brake system.
w/Rear Drum
Park Brake Cable Replacement - Intermediate (w/Rear Drum)
Removal Procedure