Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
w/Rear Drum
Park Brake Cable Replacement - Right Rear (w/Rear Drum)
Tools Required
^
J37043 Park Brake Cable Release Tool
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
1. Ensure that the park brake is released.
2. Raise the vehicle.
3. Relieve tension on the park brake cables by pulling down on the front park brake cable (1) just in front of the equalizer.
4. Remove the right park brake cable (2) from the equalizer.
5. Remove the park brake cable from the frame bracket and guides.
6. Remove the cable clip bolt (1) at the rear axle housing.
7. Remove the right cable (3) from the clip on top of the rear axle housing.
8. Remove the rear brakes shoes.
