Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
3. Position the cable clip (2) to the rear axle housing.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the cable clip bolt (1).
Tighten the bolt to 22 Nm (16 ft. lbs.).
5. Install the right cable (3) over the clip on top of the rear axle housing.
6. Install the park brake cable through the frame bracket and guides.
7. Install the right park brake cable (2) to the equalizer.
8. Lower the vehicle.
9. Adjust the park brakes.
Equalizer Replacement
Park Brake Cable Equalizer Replacement (w/Rear Disc)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
