gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Wheel Fastener: > < Drivetrain - Gen II Vs. Gen III Wheel Hub Changes|Page 3601
Page 1
background image

Wheel Fastener: Customer Interest
Wheels - Hubcaps Loose/Rattling

Info - Availability of New Functional Nut Caps For Steel Wheels 
# 05-03-10-002 - (Mar 21, 2005)

Models:
2005 Chevrolet Silverado Models
2005 GMC Sierra Models

with Steel Wheels

Some vehicles may exhibit a condition of loose or rattling wheel hubcaps, especially on the front positions.

This may be the result of brake heat distortion of the functional nut caps on the wheels.

If this condition is encountered, only the functional nut caps in the hubcap assembly should be replaced, NOT the entire hubcap assembly.

New functional nut caps, P/N 9596657, are now available. These new caps consist of more heat resistant material and are less susceptible to heat
distortion. The new functional nut caps are dark gray in color. The original caps are black. Therefore, ALL functional nut caps on the vehicle must be
replaced (24 functional nut caps on 6 bolt vehicles and 32 functional nut caps on 8 bolt vehicles).

The old (black) functional nut caps should be snapped out of the hubcaps, and the new (dark gray) functional nut caps snapped back into place. When
installing the hubcaps back on the vehicle, refer to Corporate Bulletin Number 03-03-10-002A. Use of Correct Installation Procedure for Loose Hubcap
Assembly for the correct procedure for tightening the nut caps.

Parts Information

Disclaimer

All Technical Service Bulletins for Wheel Fastener: > < Drivetrain - Gen II Vs. Gen III Wheel Hub Changes|Page 3601