Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
10. Connect the chassis electrical harness connectors to the EBCM.
11. Install the transfer case harness to the clip bracket.
12. Install the clip to the bracket on the frame.
13. Install the fuel line clip to the bracket on the transfer case, if equipped with 4WD.
14. Install the fuel line clips to the brackets on the transmission.
15. Install the HO2S sensor connector to the bracket.
16. Install the fuel pipe bracket to the bellhousing stud.
17. Install the fuel pipe bracket nut.
