Sierra 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Replacement - Front
Propeller Shaft Replacement - Front
^
Tools Required
-
J 43218 Clamp Pliers - Narrow Jaw
Removal Procedure
Important:
Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include the
following components:
^
The propeller shafts
^
The wheel drive shafts
^
The pinion flanges
^
The output shafts
Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values,
and any measurements obtained prior to disassembly.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case shield, if equipped.
3. Remove the rear propeller shaft boot clamp (4) by prying up the exposed end of the clamp with a flat-bladed tool.
4. Reference mark the relationship of the propeller shaft to the front axle pinion yoke.
