Sierra 1500 4WD V8-6.0L (2007)
4. Insert the park brake cable conduit (2) into the equalizer (3).
Ensure the locking tabs on the cable conduit are fully engaged into the equalizer.
5. Connect the left rear park brake cable to the intermediate cable connector (1).
6. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
7. Adjust the park brake. Refer to Park Brake Adjustment (Disc Brake) Park Brake Adjustment (Drum Brake).
Parking Brake Rear Cable Replacement - Right Side (JD9)
Parking Brake Rear Cable Replacement - Right Side (JD9)
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Disconnect the right park brake cable (1) from the intermediate cable equalizer bar (2).
