Sierra 1500 4WD V8-6.0L (2007)
8. Disconnect the park brake cable eye (3) from the park brake actuator lever (2).
9. Remove the park brake cable from the bracket by pulling the cable conduit (1) rearward to compress the spring and sliding the cable conduit out of
the bracket.
10. Remove the park brake cable assembly from the vehicle.
Installation Procedure
1. Connect the right park brake cable eye (3) to the park brake actuator lever (2).
2. Install the park brake cable to the rear axle bracket by pulling the cable conduit (1) rearward to compress the spring and inserting the cable conduit
into the rear axle bracket.
