Sierra 1500 4WD V8-6.0L (2007)
Notice: Refer to Fastener Notice.
3. Install the park brake cable clip bolt (2).
Tighten the bolt to 22 N.m (16 lb ft).
4. Connect the park brake cable (1) to the rear axle housing cover clip.
5. Insert the park brake cable conduit (2) into the frame bracket.
Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.
6. Connect the right rear park brake cable to the equalizer (1).
7. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
8. Adjust the park brake. Refer to Park Brake Adjustment (Disc Brake) Park Brake Adjustment (Drum Brake).
Park Brake Cable Guide Replacement