Sierra 1500 4WD V8-6.0L (2007)
6. Gather the branches of the engine wiring harness and position over the top of the engine.
7. Position the engine wiring harness clip to the generator bracket and install the clip bolt (3).
Tighten the bolt to 9 N.m (80 lb in).
8. Position the negative battery cable terminal (2) and engine wiring harness ground terminal (3) to the right cylinder head.
9. Install the negative battery cable stud (1) to the cylinder head.
Tighten the stud to 25 N.m (18 lb ft).
