Sierra 1500 4WD V8-6.0L (2007)
1. Install the ignition lock cylinder case (1) to the vehicle.
Notice: Refer to Fastener Notice.
2. Install the 3 ignition lock cylinder case screws (2).
Tighten
Tighten the screws to 7 N.m (62 lb in).
3. Install the park lock cable into the lock cylinder housing.
4. Connect the passlock and key buzzer to the ignition lock cylinder case.
5. Install the ignition/start switch.
6. Install the inflatable restraint steering wheel module coil.
