Sierra 1500 4WD V8-6.0L (2007)
Notice: Refer to Power Steering Hose Disconnected Notice.
2. Disconnect the power steering fluid cooler hose clamp and hose (3) from the steering gear (2).
3. Remove the power steering gear outlet pipe (1) from the steering gear (2).
Installation Procedure
1. Install the power steering gear outlet pipe (1) to the steering gear (2).
2. Connect the power steering fluid cooler hose (3) and hose clamp to the steering gear (2).
3. Clean any excess fluid from the vehicle and remove the drain pans.
4. Fill and bleed the power steering system.
Power Steering Gear Outlet Pipe/Hose Replacement (Gas Without Hydroboost)
Power Steering Gear Outlet Pipe/Hose Replacement (Gas Without Hydroboost)
