Sierra 1500 4WD V8-6.0L (2007)
Power Steering Pump Seal: Service and Repair
Power Steering Pump Shaft Seal Replacement
Removal Procedure
1. Remove the power steering pump from the vehicle.
Important: Use the shim stock in order to protect the drive shaft.
2. Use a chisel in order to cut and remove the power steering pump shaft seal.
Installation Procedure
1. Lubricate the new power steering pump shaft seal with power steering fluid.
2. Use a deep 1 inch tall socket in order to install the new power steering pump shaft seal.
3. Install the power steering pump.