Sierra 1500 4WD V8-6.0L (2007)
6. Install the lower ball joint retaining nut.
Tighten nuts to 110 N.m (81 lb ft).
7. Install the lower shock absorber module mount bolts.
Tighten bolts to 50 N.m (37 lb ft).
8. Remove the support for the steering knuckle and upper control arm.
9. Install the wheel drive shaft, if equipped.
10. Install the stabilizer shaft link to the lower control arm.
11. Install the tire and wheel.
12. Remove the support and lower the vehicle.
13. Align the front end. Refer to Wheel Alignment Measurement.
