Sierra 1500 4WD V8-6.0L VIN U (2006)
Seat Cover: Service and Repair
Seat Back Cover and Pad Replacement - Front
Seat Back Cover and Pad Replacement - Front
Removal Procedure
1. Remove the head restraint.
2. Remove the seat trim panel.
3. Remove the nut from the lower seat belt anchor.
4. Disengage the J-strip retainer on the bottom of the seat back cover.
5. Disconnect the heater seat element connector, if equipped.
6. Using a side motion, carefully lift the seat back cover partially off the foam pad in order to access the arm rest clip.
7. Remove the armrest, if equipped.
8. Using a flat-bladed tool, lift the seat cover over the air bag cover.
9. Remove the seat cover to the top of the seat.
10. Disengage the panel fasteners in order to remove the rear cardboard panel.
11. Unclip the head restraint retainers. Refer to Head Restraint Retainer Replacement - Front Seat.
12. Remove the bolts which retain the seat belt tower cover.
13. Remove the seat belt tower cover.
