Sierra 1500 4WD V8-6.0L VIN U (2006)
Radiator Cooling Fan Motor: Service and Repair
Cooling Fan Replacement - Electric
Cooling Fan Replacement - Electric
Removal Procedure
1. Remove the cooling fan and shroud.
2. Remove the cooling fan blade retainers.
3. Remove the cooling fan blades.
Installation Procedure
Important: The electric cooling fan assembly uses a 5-blade fan and a 7-blade fan, it does not matter which side the fan blades are installed on. DO
NOT install two 5-blade assemblies or two 7-blade assemblies, as this would cause a noise issue.
1. Install the cooling fan blades.
2. Install the cooling fan blade retainers.
3. Install the cooling fan and shroud.
