Sierra 1500 4WD V8-6.0L VIN U (2006)
Gear Sensor/Switch: Service and Repair
NVG 261-NP2 - Transfer Case
Transfer Case Gear Indicator Switch Replacement
Removal Procedure
1. Remove the transfer case shield, if equipped.
2. Disconnect the gear indicator switch electrical connector (2).
3. Remove the gear indicator switch.
Installation Procedure
1. Install the gear indicator switch.
^
Tighten the switch to 27 Nm (20 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.