Sierra 1500 4WD V8-6.0L VIN U (2006)
9. Install the nut (2) and washer (3) retaining the wheel drive shaft assembly to the wheel hub and bearing.
Tighten
Tighten the nut to 240 N.m (177 lb ft).
10. Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle.
Tighten
Tighten the brake hose clip bolt to 12 N.m (106 lb in).
11. Install the rotor.
12. Install the tire and wheel.
13. Lower the vehicle.